Effect of element Ru on microstructure and creep behaviour of single crystal nickel-based superalloy

By means of creep property measurement and microstructure observation, the influence of element Ru on the microstructure and creep behaviour of single crystal nickel-based superalloy is investigated. The results show that the plate-like μ phase is precipitated along {111} plane of the Ru-free alloy during thermal exposure at 1080°C and creep at 980°C. And the precipitation of μ phase in the alloy with 6(wt)%Mo and 6(wt)%W may be restrained by adding 2% Ru element. Compared to Ru-free alloy, the creep life of the 2% Ru single crystal alloy at 980°C200 MPa increases form 123 h to 333h. Compared to the 2% Ru alloy, the precipitated plate-like μ phase in the Ru-free alloy may promote the initiation and propagation of cracks along the γ matrix up to fracture, which is thought to be the main reason of the alloy having a lower creep resistances and shorter lifetime.     

电感耦合等离子体原子发射光谱法在钒钛磁铁矿中钒化学物相分析中的应用

钒钛磁铁矿中钒的化学物相分析一般测定硫化物中钒、钛磁铁矿中钒、硅酸盐中钒和钛铁矿中钒共4项。其中硫化物中钒利用强氧化剂分离,钛磁铁矿中钒利用其强磁性磁选分离,硅酸盐中钒利用氟化铵-硝酸分离,最后从残渣中得到钛铁矿中钒,使用电感耦合等离子体原子发射光谱法(ICP-AES)测定钒。试验对钒钛磁铁矿中钒的相态划分进行了统一,对各相态浸取溶剂进行选择及优化,确定分析谱线并计算检出限。按照实验方法测定3个矿区钒钛磁铁矿中总量钒和各相态钒,总量钒和钛磁铁矿中钒的测定结果与分光光度法测定值相一致;各相态钒测定结果的相对标准偏差(RSD,n=12)大部分在5%以内。各相态钒加和与总量钒进行比较,相对偏差在5%以内,满足《地质矿产实验室测试质量管理规范》要求。     

Ti对铬钼钒模具钢奥氏体化组织与性能的影响

??The microstructure and properties of die steels with Ti and without Ti at different austenitizing temperatures were studied through the combination of thermodynamic calculation and experiment. The results show that the total solution temperature of Cr23C6, Cr7C3, VC, V2C, V8C7, MoC, Mo2C and TiC is 748. 2, 952. 7, 977. 3, 632. 9, 1116. 0, 1131. 2, 645. 3 and 1044. 1??, respectively. Hardness and impact toughness both increase with the increase in temperature. When the austenitizing temperature is above 1200 ??, it has a greater influence on the hardness. Toughness of die steel with Ti is better than that without Ti. The grain becomes coarse and the amount of martensite increases with the increase of temperature. The average grain size of the die steel with Ti is 21. 4??m smaller than that without Ti, and the size of the undissolved phase of the former is about 0. 2??m smaller than that of the latter.     

镍基高温合金液相扩散焊接头组织及性能

镍基高温合金GH4413在高温下具有较为优异的高温持久强度和抗蠕变性能，在航空发动机和各种工业燃气轮机中得到广泛应用。以BNi 2作为填充合金材料使用液相扩散焊对GH4413合金进行了连接，研究了在焊接温度分别为1 030和1 080 ℃、保温时间分别为30和60 min等不同焊接参数下GH4413镍基高温合金的接头微观组织、成分分布和显微硬度。扫描电镜(SEM)以及能谱分析结果表明，当焊接温度为1 080 ℃、保温时间为60 min 时，钎缝组织中形成了性能良好的固溶体，且随着焊接温度的升高和保温时间的延长，钎缝的宽度增加，钎料元素向母材中的扩散深度逐渐增加，在母材近缝区形成了金属间化合物。     

Investigations of TaB2 on oxidation-inhibition property and mechanism of Si-based coatings in aerobic environment with broad temperature region for carbon materials

To investigate the formation mechanism of the dendrites glass-ceramics and the effect of TaB₂ modifier on the oxidation-inhibition ability of Si-based coatings in aerobic environment with broad temperature region for carbon materials, the Si-based coatings modified with different TaB₂ content were fabricated by the liquid phase sintering method. The fabricated coatings and its corresponding composite powders were investigated in dynamic TG aerobic environments up to 1500 ℃. The initial oxidation temperatures of Si-based coatings modified with TaB₂ powders are almost completely suppressed to 800 ℃. With the increase of TaB₂ phase content, the relative oxygen permeability of the Si-based coatings is significantly reduced, which can be interpreted as the generation of liquid boride, silicide and Ta-Si-B-O compound glass ceramics those can improve the stability of the coating. The formation mechanism of the dendrites glass-ceramics was illustrated.     

基于改进飞蛾扑火优化算法的MIMO雷达相位编码信号集设计

提出一种MIMO雷达相位编码信号集设计方法，该方法对飞蛾扑火优化算法进行改进，利用改进的飞蛾扑火算法优化相位编码信号集，提高其正交性.在改进方法中，增加对火焰的更新过程，使火焰不仅能够保存最优飞蛾位置还具有搜索最优解的功能.优化过程以自相关函数旁瓣峰值和、互相关函数峰值和，以及自相关函数旁瓣能量、互相关函数能量作为算法适应度函数.仿真实验结果表明，改进方法明显提高了飞蛾扑火优化算法的收敛速度和收敛精度，且优化得到的信号集具有较低的自相关旁瓣值和互相关值.     

Fabrication of high-purity HfSi2 powder via molten salt-assisted magnesium thermal reduction

In this work, high-purity HfSi₂ powders were successfully fabricated via a molten salt-assisted magnesium thermal reduction method using HfO₂ and Si as raw materials. The effects of reaction temperature and time on the formation of HfSi₂ were systemically investigated. The morphological and phase composition of as-prepared HfSi₂ powders were characterized by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, and nitrogen/oxygen determinator. The results indicated that as-obtained HfSi₂ powders possess the orthorhombic structure with approximately 6.4 μm in size and the oxygen content as low as 0.20%. This work can provide a novel route to fabricate the high-purity transition metal silicides powders.